Application
The Hot-Shot® prod is an electric livestock prod designed to assist in the movement of cattle and hogs.
Function
The Hot-Shot® prod uses batteries to power an electronic circuit that generates a high voltage pulse. This pulse is delivered by lightly touching the animal with the two electrodes. Prod is not designed for hitting or striking an animal.
Animal Protection
Please follow the regulations that apply to animal protection and slaughtering in your area.
WARNINGS
-Hot-Shot® prod is DESIGNED FOR USE ON LIVESTOCK ONLY -KEEP THE UNIT AWAY FROM CHILDERN
-NEVER USE IT ON HUMANS
-KEEP PROD DRY: If unit gets wet IMMEDIATELY TAKE STEPS TO THOROUGHLY DRY UNIT OUT to avoid corrosion and/or unintended feedback
-Clean, dry and store prod in dry environment. Remove batteries prior to cleaning or drying
-The prod generates a high voltage pulse and you should never touch the electrodes while the unit is activated
-Use in a well ventilated area. Do not use near flammable liquids or dust
-Whenever the prod is not in use, place the safety clip under the trigger button (for the DuraProd move the trigger lock to the lock position)
-Intended for ground level use only
>HS2000 & Sabre Six Instructions (PDF 499 KB)
>DuraProd™ Instructions (PDF 999 KB)
>HS2000 & Sabre Six Maintenance & Troubleshooting Guide (PDF 12.8 MB)
>DuraProd™ Maintenance & Troubleshooting Guide (PDF 4.49 MB)
Hot-Shot® Warranties
Hot-Shot® maintains a complete repair service at the factory. If a Hot-Shot® product fails due to a defect within the specified warranty period, the unit must be returned to the factory for examination. If the product is found to be defective and is within the warranty period, replacement or repairs will be made. The product will be returned postage paid.
This warranty does not include case breakage or any form of physical damage, or damage due to normal wear and tear or tampering with the handle or motor unit.
Hot-Shot® also maintains a repair for fee service at the factory. If a product is returned to the factory for repair and is not within the warranty period customers will be contacted regarding estimated repair costs prior to chargeable repair service being performed.
Returns
In the event a product needs to be returned to Hot-Shot® for a warranty claim:
1. Enclose a note with the product that includes your full name, full address and phone number
2. Enclose proof of purchase receipt
3. Send the product and above information to: Miller Mfg. Co., Attn: Repairs, 1450 West 13th Street, Glencoe, MN 55336 Or call 800-260-0888
